6 - FORM NO. 79042A
CLARKE Extractor Tools Operator's Manual
How To Clean The Carpet
WARNING:
When using the tools and the
extractor to clean, make sure this
procedure is followed.
1. Do not walk on freshly cleaned carpet for at least
four hours or until the carpet is dry to the touch.
2. Do not remove aluminum or plastic pieces that have
been placed under the legs of the furniture until the
carpet is dry.
3. Do not allow children or pets to crawl or walk around
on the damp carpet.
How To Clean A Small Area Of Carpet
To clean a small area of carpet, follow this procedure:
1. Clean the carpet in sections of three feet
square.
2. As you make a pass, repeat one inch of the
area
already cleaned.
3. To remove more liquid from the carpet, make
passes over the area already cleaned. Do not
press the solution lever.
How To Clean A Large Area Of Carpet
To clean a large area of carpet follow this procedure:
1. Begin at the right-hand corner of the carpet.
2. Make a pass halfway along the edge of the
carpet. Pull the tool back at a steady speed.
3. Move to the edge of the carpet. Make another
pass next to your
fi
rst pass.
4. As you make more passes, repeat one inch of
the area already cleaned. Make each pass four
inches different in length to prevent making a
line in the center of the carpet.
5. Make more passes until half of the carpet is
cleaned.
6. Move to the right-hand corner of the part of the
carpet not yet to be cleaned.
7. Make a pass halfway along the edge of the
carpet.
8. As you make more passes, repeat one inch of
the area already cleaned.
9. Make more passes until all of the room is
cleaned.