Clarke 4501135, Инструкция пользователя

Страница: 8 / 24

8
DTC --Diagnostic Trouble Codes (DTC) that identify which section of
the emission control system has malfunctioned.
Enabling criteria - (Also termed Enabling Conditions). These are the
vehicle-specific events or conditions that must occur within the engine
before the various monitors will set, or run. Some monitors require
the vehicle to follow a prescribed
“drive cycle” routine as part of
the enabling criteria. Drive cycles vary among vehicles and for each
monitor in any particular vehicle.
OBDII Drive Cycle - A specific mode of vehicle operation that provides
conditions required to set all the readiness monitors applicable to the
vehicle to the
“ready” condition. The purpose of completing an OBD
II drive cycle is to force the vehicle to run its on-board diagnostics.
Some form of a drive cycle needs to be performed after DTCs have
been erased from the PCM
’s memory or after the battery has been
disconnected. Running through a vehic
le’s complete drive cycle will “set”
the readiness monitors so that future faults can be detected. Drive
cycles vary depending on the vehicle and the monitor that needs
to be reset. For vehicle specific drive cycle, consult the vehi
cle’s
o
wner’s manual.