10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STEP 4: SQUARE AND ANCHOR THE FRAME
1. Ensure the frame is standing at the desired location.
2. Level the frame both end to end and side to side.
3. Check the frame measures 6’ (183cm) in width.
4. Measure the distance between the interior of the frame diagonally. The
sections A to B and C to D should be equal length. If not, tap the corner leg
of the longer section using a rubber mallet inward until both diagonals are
equal.
WARNING: SERIOUS INJURY TO PERSONS OR PROPERTY COULD RESULT IF
THE SHED IS NOT SECURELY ANCHORED, WITH EITHER THE GROUND
ANCHORS SUPPLIED OR IF SITED ON CONCRETE OR TARMAC USE
SUITABLE SUBSTANTIAL GROUND ANCHOR BOLTS.