Clarke 3503574, Руководство по сборке

Страница: 10 / 16

10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
STEP 4: SQUARE AND ANCHOR THE FRAMES
1. Check that the width measurements of the frame are 12’ at both the front
and back corners, as well as across the center.
2. Take a diagonal
measurement as shown in
Diagram F. When these two
measures are equal the
frame is square. Adjust the
frame until they are equal
to within 1".
3. Once equal, check the
width measurement again
to ensure all widths are
equal at 12'.
4. Next, install the anchors
(Parts #16, #17 & #18) at the
4 corner legs by screwing the removable anchors (#16) into the ground on
the inside of the structure.
5. Secure with cable (#17) and cable clamp (#18) (as shown in Diagram G).
• Ensure the clamps are securely gripping the cables.
WARNING: SERIOUS INJURY TO PERSONS OR PROPERTY COULD RESULT IF
THE GARAGE IS NOT SECURELY ANCHORED, WITH EITHER THE GROUND
ANCHORS SUPPLIED OR IF SITED ON CONCRETE OR TARMAC USE
SUITABLE SUBSTANTIAL GROUND ANCHOR BOLTS.