23
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING A NEW BAR AND CHAIN
1. Fit the tensioning wheel (removed from the old bar) to the new bar as
shown below.
2. Push the tensioning wheel and bar into position as shown below.
3. Place the chain over the sprocket, ensuring that the chain is pointing in the
correct direction.
• The chain bar is marked with an arrow, showing the direction in which
the chain will travel.
• The cutting teeth on the upper side of the bar must point forward.
4. Feed the chain around the bar, the chain will droop slightly along the
bottom edge.
5. Replace the housing cover and tighten the cover locking screw hand tight.
6. Adjust the chain tension, See “Chain Tension” on page 11.
Содержание 3402072
Страница 28: ......
