22
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7. Use the blade locking wrench
to prevent the blade from
turning and remove the blade
retaining nut using the open
wrench provided. as shown on
page 14.
8. Remove the washer and outer
retaining disc and remove the
blade while deflecting the
inner guard by hand. Brush
away any dust and debris from
the spindle before fitting the
new blade.
9. Replace all components in
reverse order
SHARPENING THE BLADE
The saw blade can be sharpened several times without removing it from the
machine. Use a fine cut square bladed file of 8-12” for sharpening.
When sharpening manually, only file the front rake of each tooth over a
distance of about 5-7mm.
ALWAYS keep the original shape of the tooth. Take care not to make sharp
notches at the root of the tooth with your file.
Check the blade carefully for cracks
NOTE:
Replacement blades are available from your CLARKE dealer as
Part No 3401991.
CAUTION: INSTALLING THE BLADE THE WRONG WAY ROUND WILL RESULT
IN DAMAGE TO THE BLADE.
Содержание 3401997
Страница 28: ......
