10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ASSEMBLY
This log saw was partially
assembled at the factory. To
complete your saw follow the
instructions below.
SAW BLADE GUARDS
1. Place the back plate 1,
against the outside of the
connecting part of the log
carriage and align its two
holes with the upper two holes
of the connecting part as Fig
A,
step 1.
2. Fix the back plate 1 to the
table with one M8 x12 bolt, flat
washer and nut as Fig A, step
2.
3. Put the saw blade guard 1
against the inner side of the
same connecting part, align
the holes and bolt the saw
blade guard 1, connecting
part and back plate, together
with three M8 x 20 bolts,
washers and nuts.
4. Repeat the same assembly
steps on the other side for
back plate 2 and saw blade
guard 2 as Fig A steps 3 & 4.
Содержание 3401997
Страница 28: ......
