4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARE OF POWER TOOLS
1. Read this manual carefully. Learn the tool’s applications and limitations, as
well as the specific potential hazards peculiar to it.
2. Always disconnect the power tool from the power supply before carrying
out any repairs or changing of accessories.
3. Do not use a power tool if the switch does not turn it on and off.
4. Always check for any damage or any condition that could affect the
operation of the tool. Damaged parts should be properly repaired.
5. This tool complies with the relevant safety standards. Repairs should only be
carried out by qualified persons using original spare parts, otherwise this
may result in considerable danger to the user.
6. Never use this power tool for any other purpose than that described in
these instructions.
7. Never abuse the power cable by yanking the cable to disconnect it from
the socket. Keep the cable away from heat, oil or sharp edges.
8. Guard against electric shock. Avoid body contact with earthed or
grounded surfaces.
9. If the tool should be used outdoors, use only extension cables intended for
outdoor use and marked accordingly.
10. Avoid accidental starting by making sure the power switch is off before
plugging in the power cable.
ADDITIONAL SAFETY RULES FOR HOT AIR GUNS
1. Always keep the mains cable well away from the hot air gun, particularly if
laying it down temporarily during use.
2. Never leave the hot air gun unattended when it is switched on.
3. Always wear safety gloves and never touch the hot nozzle.
4. Never point the hot air gun at any person or animal.
5. Never use in an atmosphere where solvent vapours are present.
6. Never use the hot air gun as a hair dryer.
CAUTION: WITH ALL TOOLS, THERE ARE CERTAIN HAZARDS INVOLVED
WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND CAUTION
WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY. HOWEVER,
IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR IGNORED,
PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO PROPERTY MAY
RESULT.
