Clarke Owner's Manual - Vision 38 I/32 I/IX - 26 I/IX
- 17 -
How To Install The Brushes Or Pad Drivers
To install the brushes or pad drivers on the machine,
follow this procedure:
1. Engage the parking brake.
2. Turn the key switch "ON".
3. Put the brush switch in the "UP" position.
4. Turn the key switch "OFF".
5. Go to the front of the machine.
6. Pull out the brush housing pin and remove the
right and left brush housings.
7. Put a brush or pad driver under the brush motor plate.
See figure #14.
8. Align the lugs on the motor gimbal with the slots in the
brush gimbal.
9. Pull the brush up until the gimbal locks.
10. Repeat steps 7, 8, and 9 to install the second brush
or pad driver.
How To Remove The Brushes Or Pad Drivers
To remove the brushes or pad drivers from the
machine,follow this procedure:
1. Engage the parking brake.
2. Turn the key switch "ON".
3. Put the brush switch in the "UP" position.
4. Turn the key switch "OFF".
5. Go to the front of the machine.
6. Push down on two sides of the brush or pad driver until
the gimbals release.
HOW TO PREPARE THE MACHINE FOR OPERATION
Figure # 14
Содержание 26I-00260A
Страница 29: ...Clarke Owner s Manual Vision 38 I 32 I IX 26 I IX 29 NOTES...
Страница 54: ...Page 54 Clarke Owner s Manual Vision 38 I 32 I IX 26 I IX Clarke Vision 32 IX 26 IX ElectricalSchematic10 96...
Страница 55: ...Clarke Owner s Manual Vision 38 I 32 I IX 26 I IX 55 Clarke Vision 38 I 32 I 26 I Electrical Schematic 10 96...
Страница 62: ...NOTES...