background image

4

GENERAL MACHINE USE AND CARE

1. Prior to use, all operators should become familiar with the instructions in this 

booklet especially the ON/OFF switch for emergency stopping.

2.

ALWAYS

 maintain the compressor with care and keep it clean for best / 

safest performance.

3.

NEVER 

use this compressor if any part is damaged. Have it inspected and 

repaired by your dealer.

4.

NEVER 

attempt to modify the air compressor, tank, fittings or attachments in 

any way. Doing so will invalidate the guarantee and could result in 
personal injury.

5.

NEVER 

abuse the power cable.

 

Never pull on the cable when removing the 

plug from the socket, or lift the compressor by the power cable.

6.

ONLY

 use extension leads that are of an appropriate power rating and 

suitable for the work environment. Extension leads must have an earth 
connection. Inspect the extension lead regularly and replace if damaged.

7.

ONLY USE RECOMMENDED PARTS: 

To avoid the risk of bursting, only hoses 

with a rated pressure of 10 bar, or more should be used. Never attempt to 
repair damaged hoses.

8.

NEVER 

abuse the compressor by standing on it.

AIRLINE HOSES

1.

ALWAYS

 ensure that equipment or power tools used in conjunction with the 

compressor have a safe working pressure exceeding that of the machine.

2.

ALWAYS

 keep the air hose away from any attached power tools and 

ensure that the operator is not restricted by the length of the hose.

3.

ALWAYS

 take care when a long air hose is required in the work area as it 

presents a trip hazard. Coil the hose away as soon as the job is finished.

4.

ALWAYS

 avoid kinking or trapping the air hose. Always replace faulty hoses 

and never attempt a repair if a leak is detected.

5.

NEVER

 abuse hoses or connectors. NEVER carry an air tool by the hose, or 

yank it to disconnect from the air supply. Keep hoses away from heat, oil 
and sharp edges. Check hoses for leaks or worn condition before use and 
ensure that all connections are secure.

6.

ALWAYS

 ensure that the air supply is turned off at the machine outlet and 

any air pressure vented from within the compressor and any attached 
equipment when disconnecting air hoses or other equipment.

Содержание 2320875





















Отзывы: