4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10.
NEVER
touch hot surfaces.
During operation, the motor, connections,
compressor body, cylinder head and tubes may get hot. DO NOT touch
these until the compressor has cooled down.
GENERAL MACHINE USE AND CARE
1. Prior to use, all operators should become familiar with the instructions in this
booklet especially the ON/OFF switch for emergency stopping.
2.
ALWAYS
maintain the compressor with care and keep it clean for best /
safest performance.
3.
NEVER
use this compressor if any part is damaged. Have it inspected and
repaired by your CLARKE dealer.
4.
NEVER
attempt to modify the air compressor, tank, fittings or attachments in
any way. Doing so will invalidate the guarantee and could result in
personal injury.
5.
NEVER
abuse the power cable.
NEVER
pull on the cable when removing
the plug from the socket, or lift the compressor by the power cable.
6.
ONLY
use extension leads that are of an appropriate power rating and
suitable for the work environment. Extension leads must have an earth
connection. Inspect the extension lead regularly and replace if damaged.
7.
ONLY USE RECOMMENDED PARTS:
To avoid the risk of bursting, only hoses
with a rated pressure of 10 bar, or more should be used. Never attempt to
repair damaged hoses.
8.
NEVER
abuse the compressor by standing on it.
AIRLINE HOSES
1.
ALWAYS
ensure that equipment or power tools used in conjunction with the
compressor have a safe working pressure exceeding that of the machine.
2.
ALWAYS
keep the air hose away from any attached air tools and ensure
that the operator is not restricted by the length of the hose.
3.
ALWAYS
take care when a long air hose is required in the work area as it
presents a trip hazard. Coil the hose away as soon as the job is finished.
4.
ALWAYS
avoid kinking or trapping the air hose.
ALWAYS
replace faulty
hoses and never attempt a repair if a leak is detected.
5.
NEVER
abuse hoses or connectors.
NEVER
carry an air tool by the hose, or
yank it to disconnect from the air supply. Keep hoses away from heat, oil
and sharp edges. Check hoses for leaks or worn condition before use and
ensure that all connections are secure.
6.
ALWAYS
ensure that the air supply is turned off at the machine outlet and
any air pressure vented from within the compressor and any attached
equipment when disconnecting air hoses or other equipment.
Содержание 2242035
Страница 20: ......
