Clarke 01207SD, Руководство оператора

Страница: 4 / 33

EN ENGLISH
-4- FORM NO. 71399A Clarke
®
MP-1800 - (EN)
OPERATOR SAFETY INSTRUCTIONS (cont.)
WARNING:
Use of this machine as a step or furniture could result in injury or damage. Do not use this
machine as a step or furniture. Do not ride on this machine.
WARNING:
To avoid injury keep hands, feet and loose clothing away from all moving parts of this
machine.
WARNING:
Injury to operator or bystanders could occur if an abrupt change in floor surface texture is
encountered when using this machine. Abrupt change in floor surface texture can cause a
sudden pulling motion by this machine. This sudden pulling motion can result in loss of
control of the machine which could injure the operator or bystanders. Avoid motions that
could cause machine to cross from a smooth floor surface to a carpeted or rough texture
floor surface Avoid motions that could allow the machine to come in contact with low
obstacles, such as floor electrical outlets, door stops or entry molding, etc.
WARNING:
Water solutions or cleaning materials used with this type of machine can leave wet areas
on the floor surface. These areas can cause a dangerous condition for the operator or
other persons. Always put CAUTION signs near the area being cleaned.
WARNING:
Any alterations or modifications of this machine could result in damage to the machine or
injury to the operator or other bystanders. Alterations or modifications not authorized by
the manufacturer voids any and all warranties and liabilities.
CAUTION:
The machine is heavy. Get assistance before attempting to transport or move it.
Note: This machine is for commercial use.
MACHINE INTRODUCTION
The Clarke MP-1800 Marble Polisher
The MP-1800 marble polisher can be used to maintain and/or restore marble floor finishes to their original grandeur.
The MP-1800 is a high performance marble polisher that is specially designed with operator ease in mind for in-
creased productivity.
Machine Specifications
Model Code Number 01207SD
Voltage (Volts) 120
Frequency (Hz) 60
Current (Amps) 15
Power (hp) 1.5
Brush Diameter (inches) 18
Block Diameter (inches) 16
Brush Speed (rpm) 175
Cord Length (feet) 75
Weight (pounds) 127