manualshive.com logo in svg

Clark WSTX22, Руководство оператора, Страница: 49 / 80

Поделиться
Скачать
Clark WSTX22 Скачать руководство пользователя страница 49

5.5

Operating Procedures

Lowering the control handle to the operating position disengages the 

brake. Pushing the control handle to the "UP" position or pulling the 

control handle to the down position applies the brake and shuts off 

the drive motor.
To stop the truck during operation, release the travel control and apply 

the brake by pushing the control handle to the "UP" position to bring 

the truck to a smooth stop.

Plugging (optional braking)

You can change direction and stop the truck without braking, by "plug-

ging" As you are traveling, move travel control to the opposite direction. 

The truck should slow to a smooth, controlled stop then accelerate in 

the opposite direction.
You can control the plugging distance with the travel control (direction/

speed): The farther the direction speed control is rotated, the shorter 

the reversal distance.

 CAUTION

Be careful when plugging. Any sudden change in direction 

can cause the load to move or fall off forks.

Braking

WSTX22

Brake On

Brake Off

Brake On

Содержание WSTX22

















































































Отзывы:

Нет отзывов