Clark OSQ 126, Руководство оператора

Страница: 82 / 100

6.12
Planned Maintenance
Battery Removal and Installation
Battery Care
Battery Cleaning
Never wash the battery when it is in the vehicle. The easiest and most
satisfactory method of cleaning a battery is to wash it occasionally with a
low-pressure cold water spray. The top can also be cleaned using a solution
of baking soda and water (combine 1/2 lb of baking soda with 1 gallon of
clean water, then stir to dissolve) and rinsed with clean water. It is good
practice to have this solution in a battery room at all times.
Refer to the battery manufacturer or supplier for their recommended battery
maintenance and care procedures.
Use CLARK Battery Saver Oil, to clean and protect the your vehicle's battery.
1. Park the vehicle in the designated battery service area.
2. Disconnect the battery connector.
3. Secure the battery connector out of the way to prevent it from being
caught on the vehicle when the battery is removed.
4. Remove the battery baffle (1) and roll the battery out from the side.
5. Use an approved lifting device to remove and transport the vehicle
battery. Remove the battery and move it to a safe, secure storage
location on an approved battery rack or wooden pallet.
6. Installation is the reverse of removal.
1