manualshive.com logo in svg

Clark OSQ 126, Руководство оператора, Страница: 12 / 100

Поделиться
Скачать
Clark OSQ 126 Скачать руководство пользователя страница 12

x

Safety Symbols and Messages

Improper operation can cause accidents. Do not operate improperly setup 

or  damaged  equipment.

 Read and understand

 all the procedures for 

safe driving and maintenance described in this manual. Do not hesitate to 

ask for assistance. 

Stay alert and follow

 all safety rules, regulations, and 

procedures. Avoid accidents by recognizing and avoiding dangerous pro-

cedures or situations before they occur. 

Drive and work safely

 and follow 

the safety symbols and their messages on the vehicle and in this manual.

Safety symbols and messages

 are described in this manual and located 

on the vehicle to identify specific areas where potential hazards exist and 

provide instructions or special precautions that should be taken. Know and 

understand the meaning of these instructions, symbols, and messages. 

Damage to the vehicle, serious injury, or death to you or other persons may 

result if these messages are not followed.

NOTE

This message is used when special information or 

instruction is needed relating to procedures, equipment, 

tools, specifications or other special data.

IMPORTANT!

This message is used when special precautions or action 

should be taken to avoid damage to the vehicle or one of 

it's components.

 WARNING

Indicates a potentially hazardous situation which, if not 

avoided, could result in serious injury or death.

 CAUTION

Indicates a potentially hazardous situation which, if not 

avoided, may result in injury. It may also be used to alert 

against unsafe practices.

 DANGER

Indicates an imminently hazardous situation which, if not 

avoided, will result in serious injury or death.

Содержание OSQ 126





































































































Отзывы:

Нет отзывов