Clark HWXE 30, Руководство оператора

Страница: 71 / 88

6.5
Planned Maintenance
9. Before Starting to Drive the Truck:
• Remove drive wheel chocks.
• Plug-in battery connector.
• Lower and turn control handle to operating position.
• Insert key and turn to ON position.
• Make sure path of travel is clear.
• Check function of controls and emergency reversal switch.
• Check function of brakes.
10. Before Leaving the Truck:
• Park truck in designated area.
• Fully lower forks.
• Raise and turn control handle.
• Turn key switch to OFF and remove key.
• Unplug battery connector.
• Block drive wheel.
11. Brakes, steering mechanisms, control mechanisms, warning devices,
lights, lift overload devices, guards and safety devices, lift, reach and
rotation mechanisms, and frame members must be carefully and reg-
ularly inspected and maintained in a safe operating condition.
12. Special trucks or devices designed and approved for hazardous area
operation must receive special attention to ensure that maintenance
preserves the original, approved safe operating features.
13. All hydraulic systems must be regularly inspected and maintained
in conformance with good practices. Lift cylinders, valves and other
similar parts must be checked to assure that leakage (drift) has not
developed to the extent that it would create a hazard.
14. When working on the hydraulic system, make sure the battery is
disconnected, the forks are fully lowered, and hydraulic pressure has
been relieved in the hoses and tubing.