manualshive.com logo in svg

Clark HWX 30-40, Руководство оператора

Поделиться
Скачать
Clark HWX 30-40 Скачать руководство пользователя страница 43

4.3

Travel Control

PWX Travel Control

Rotate the direction/speed control 
as shown to travel forward. Rotate 
the direction/speed in the opposite 
direction to travel in reverse. ("Re-
verse" is defi ned as the direction in 
which the forks point.) Truck speed 
increases the further you rotate the 
direction/ speed control. When you 
release the control, it rotates back 
to the "neutral" position.

HWX Travel Control

Rotate the direction/speed control 
as shown to travel forward. Rotate 
the direction/speed in the opposite 
direction to travel in reverse. ("Re-
verse" is defi ned as the direction in 
which the forks point.) Truck speed 
increases the further you rotate the 
direction/ speed control. When you 
release the control, it rotates back 
to the "neutral" position.

HWX High Speed Control

When riding HWX model trucks for 
long distances, you can use the 
high-speed control on the opera-
tor hand rail to provide additional 
speed. Rotate the direction/ speed 
control fully to the maximum speed 
position, then press the high-speed 
control button. The truck goes into 
higher speed and stays there until 
the throttle returns to neutral.

Содержание HWX 30-40















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды