Clark HWX 30-40 Скачать руководство пользователя | Manualshive

Страница: 12 / 78

background image

x

Improper operation can cause accidents. Don’t take chances with incor-
rect or damaged equipment.

Read

and

understand

the procedures for

safe driving and maintenance outlined in this manual. Don't hesitate to
ask for help.

Stay alert!

Follow safety rules, regulations, and procedures.

Avoid accidents by recognizing dangerous procedures or situations
before they occur.

Drive and work safely

and follow the safety signs

and their messages on the truck and in this manual.

Safety signs and messages

are placed in this manual and on the truck

to provide instructions and identify specifi c areas where potential hazards
exist and special precautions should be taken. Know and understand
the meaning of these instructions, signs, and messages. Damage to
the truck, death, or serious injury to you or other persons may result
if these messages are not followed. If warning decals are damaged,
they must be replaced. Contact your CLARK dealer for replacements.

NOTICE

This message is used when special information, instruc-
tions or identifi cation are required relating to procedures,
equipment, tools, pressures, capacities and other special
data.

IMPORTANT

This message is used when special precautions should
be taken to ensure a correct action or to avoid damage to
or malfunction of the truck or a component.

CAUTION

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices.

WARNING

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

DANGER

Indicates an imminently hazardous situation which, if not
avoided, will result in death or injury.

Safety Signs and Safety Messages

«
...
10
11
12
13
14
...
»

Содержание HWX 30-40















































































Отзывы:

Нет отзывов

Похожие инструкции для HWX 30-40

Бренд: Ravas Страницы: 44

Бренд: Yale Страницы: 105

Бренд: Dini Argeo Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды