Isolation Transformer
Installation Guide
303-797-7500
www.clarksynthesis.com
1. Place the Isolation Transformer in a
dry, indoor, location. The transformer
is not designed to be mounted
outdoors.
4. Locate the speaker cable from the
amplifier. Remove .75 in. (20 mm) of
the cable’s outer jacket.
7. Insert the positive wire (usually
white or red) to the 1+ terminal, and
the negative wire (usually black) to the
1- connection. Tighten the 1+ and 1-
screws.
2. Transformer may be mounted to
a wall using mounting tabs. (The
transformer is heavy and must be
securely mounted to the wall.)
5. Remove .3 in. (8 mm) of insulation
from each wire.
8. Push the gray ring down until it
locks on the connector’s body.
3. Locate the Neutrik NL3FC Speakon
connector. Remove the connector
from the bag.
6. Place the Speakon connector’s blue
bushing on the amplifier cable.
9. Screw the blue bushing onto the
connector’s body. The connector is
now assembled.
