23
• When I use a pendant, my phonebook records are shown
in alphabetical order, but I assigned priority levels to
each record.
Your phonebook is shown in alphabetical by default; go to Menu/
Advanced Menu/Phonebook order and change to Priority.
• I turned both the Sick Bell feature and the Quick Dial
feature to on, but one of them doesn’t work.
You can’t have both features active at the same time. You need to
pick one to be active, and make sure that the other is set to off.
• I have Sick Bell (or Quick Dial) feature enabled, but I
cannot enable them using the switch plugged into the
pendant.
If you have a switch plugged into your pendant, the pendant and
the switch only work in pendant mode. Unplug the switch from
the pendant to access the Sick Bell (or Quick Dial) mode.
• I press the button on the pendant, but nothing happens.
Make sure your pendant is registered to the main unit (Fortissimo
or Sempre). If you have two pendants registered to your main unit,
only one can control your main unit at any given time.
• I do not know why the light(s) on my pendant blink in
this particular pattern
Please review the section describing the lighting patterns for your
pendant.
TROUBLESHOOTING
