Clarity E713CC страница 3 Скачать руководство пользователя | Manualshive

Страница: 3 / 64

background image

3

WARNINGS:

PRIVACY OF COMMUNICATIONS MAY NOT BE

ENSURED WHEN USING THIS PHONE.

To maintain the compliance with the FCC’s RF exposure guideline, place
the base unit at least 20 cm from nearby persons. To reduce the risk of
fire or injury to persons, read and follow these instructions.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the telephone.

3. Avoid contact with liquids. Do not locate base unit or handset near water, for

example, near a bathtub, wash basin, sink or laundry tub, in a wet basement or near
a swimming pool.

4. Avoid using a telephone (other than a cordless type) during a storm. There may be a

remote risk of electrical shock from lightning.

5. Do not use the telephone to report a gas leak in the vicinity of the leak.

6. Unplug this telephone from the wall outlets before cleaning. Do not use liquid

cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning.

7. Place this telephone on a stable surface. Serious damage and/or injury may result if

the telephone falls.

8. Do not cover the slots and openings on this telephone. This telephon should never

be placed near or over a radiator or heat register. This telephone should not be
placed in a built-in installation unless proper ventilation is provided.

9. Operate this telephone using the electrical voltage as stated on the base unit or the

owner’s manual. If you are not sure of the voltage in your home, consult your dealer
or local power company.

10. Do not allow anything to rest on the power cord or locate this product in an area

where the power cord is likely to be damaged by furniture or foot traffic.

11. Do not overload wall outlets or extension cords as this can increase the risk of fire

or electrical shock.

12. Never push any objects through the slots in the telephone. They can touch danger-

ous voltage points or short out parts that could result in a risk of fire or electrical
shock. Never spill liquid of any kind on the telephone.

IMPORTANT SAFETY INSTRUCTIONS

«
1
2
3
4
5
...
»

Содержание E713CC

































































Отзывы:

Нет отзывов

Похожие инструкции для E713CC

Бренд: Panasonic Страницы: 2

Opal Series 2006

Бренд: Teledex Страницы: 4

Hi-Phone Maestro

Бренд: way2call Страницы: 2

Бренд: Uniden Страницы: 42

Бренд: GE Страницы: 84

Бренд: Uniden Страницы: 47

Бренд: GE Страницы: 100

Бренд: Wacker Neuson Страницы: 44

Бренд: Uniden Страницы: 32

Бренд: MasterCraft Страницы: 32

Бренд: Plantronics Страницы: 12

Бренд: Uniden Страницы: 33

Бренд: XTline Страницы: 42

Бренд: Geemarc Страницы: 32

Бренд: Kraun Страницы: 2

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 6

DTERM DIGITAL 16 BUTTON DISPLAY

Бренд: NEC Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды