preset station. If the field strength level is
more than the threshold level, the radio will
hold at this preset station for 5 seconds with
sound output, then go to next station until
all 6 FM stations are scanned, finally the
radio will play at the preset station where
scanning started. The preset station
number on the LCD will flash during the
process. Press the
again to stop
preset scan.
AMS
- Auto store:
Press the
button for more than 2
seconds to start auto store. The radio will
scan from the lowest frequency, and
automatically store the 6 strongest stations
into the preset memories.
When auto store is complete, the radio will
start a preset scan of the 6 stations which it
has just stored.
AMS
RDS (Radio Data System) Operations
The RDS data are the PI, PS, TP, PTY, TA
and AF data.
PI
PS
PTY
TP
TA
AF
AF/REG
AF/REG
PTY
1
6
(Program identification): Code for
identifying the radio station.
(Program service): Name of the radio
station.
(Program type): Type of program such
as news, Pop music, sports etc.
(Traffic program): Code indicating a
station broadcasting traffic information.
(Traffic announcement): Function
allowing the broadcasting of traffic
information.
(Alternative frequencies): Function
allowing an automatic search for the best
alternative frequency available.
Briefly press the
button to switch AF
mode on or off.
When AF is switched on, “AF” appears on the
LCD display.
If the reception becomes bad, “AF” will blink
and the tuner will return to alternative
frequencies.
When an emergency broadcasting is
received, the message “ALARM” will appear
on the LCD display.
The volume level will be automatically
adjusted to the preset output level when the
volume is set to a lower level.
Press the
button for 2 seconds to
switch the region mode on or off.
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period.
When region is on, the current listening
program remains unchanged. When region is
off, it allows the reception moved to the
regional station.
The PTY function allows you to search for a
particular program type.
To select a program type, press the
button. “POP M” (pop music) or “NEWS” will
appear on the LCD display.
You can then select a program type using the
preset buttons
to .
The program types are divided into two
groups: the music PTY group and the speech
PTY group:
SETTING AF MODE
Regional Program Operation
Using PTY to select a program
