35
Any repairs or alterations made by the
user to this equipment, or equipment
malfunctions, may give the telecommu-
nications company cause to request the
user to disconnect the equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility, tele-
phone lines and internal metallic water
pipe system, if present, are connected
together. This precaution may be
particularly important in rural areas.
CAUTion:
Users should not
attempt to make such connections
themselves, but should contact the
appropriate electrical inspection
authority, or electrician, as appropriate.
The Ringer Equivalence Number is an
indication of the maximum number of
terminals allowed to be connected to
a telephone interface. The termination
on an interface may consist of any
combination of devices subject only to
the requirement that the sum of the
Ringer Equivalence Numbers of all the
devices does not exceed five.
(The term “IC:” before the certifica-
tion/registration number only signifies
that the Industry Canada technical
specifications were met.)
This Class B digital apparatus complies
with Canadian ICES-003.
The party responsible for
regulatory compliance:
Clarity, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Phone: 1-800-552-3368
rEGULATory CoMPLiAnCE
Privacy of communications may not be
ensured when using this phone.
CAUTion:
To maintain the compli-
ance with the FCC’s RF exposure
guideline, place the base unit at least
20 cm from nearby persons.
For body worn operation, this handset
has been tested and meets the FCC
RF exposure guidelines when used
with the
(Plantronics)
accessories
supplied or designated for this product.
Use of other accessories may not
ensure compliance with FCC RF
exposure guidelines.
industry Canada Technical
Specifications
This product meets the
applicable industry Canada
technical specifications.
Before installing this equipment, users
should ensure that it is permissible to
be connected to the facilities of the
local telecommunications company. The
equipment must also be installed using
an acceptable method of connection. In
some cases, the company’s inside wiring
associated with a single line individual
service may be extended by means of
a certified connector assembly (tele-
phone extension cord). The customer
should be aware that compliance with
the above conditions may not prevent
degradation of service in some situa-
tions. Repairs to certified equipment
should be made by an authorized
Canadian maintenance facility desig-
nated by the supplier.
