19
TELEPHonE oPErATionS
Play outgoing Message
To listen to the message greeting, press the Play Ans button. While playing, the
display screen will show the OGM icon.
Erase outgoing Message
To erase the message greeting (outgoing message), press the Play Ans button on the
base. While the message is being played, press the ERASE button on the base. Once
the recording is erased, the machine will use the default message. To record a new
message, follow the instructions above in the “Record Outgoing Message” section.
remote Access
This feature allows messages on the answering machine to be accessed away from
the house. To do this, call using a touchtone phone and wait for the answering ma-
chine to pick up. After the beep, enter the remote code. The default code is 1234.
To change this, see the instructions under the “Answering Machine Setup” section on
page 20. During this time, all the buttons will be disabled. The chart below outlines
how to operate the machine using the keypad. When finished, simply hang up the
phone. The answering machine will also automatically hang up if no commands are
entered within a ten (10) second time period.
Playback last message
Playback/Repeat message
Skip to Next Message
Record Memo
Stop Playback or Stop Memo Recording
Record new Outgoing Message (OGM)
Turn Answering Machine On or Off
Access Voice Help Menu
If the Toll Saver setting is turned on, the answering machine will pick up after two
(2) rings if there are new messages. If there are no new messages, the machine will
pick up after six (6) rings. This will let the user know if there are any new messages
without actually having to access the machine. This means that it will avoid any pos-
sible charges for air time if the call is being made from a payphone or is long distance.
To access this setting, follow the instructions under the “Answering Machine Setup”
section on Page 20.
