34
• At anytime, the user can press FLASH
button one time to go back to
standby mode.
Or
• It will go back to standby automatically at
30 seconds time out if there is no action.
Callback from CALLER ID Information
To callback from incoming call information, the base
T/P switch should be set at T.
While reviewing the incoming call list, press
ENTER and the UP (
▲
) or DOWN (
▼
) key will
format the number with the following
dialing variations:
• 7 digits without a 1 prefix:
If the area code of the Caller ID number
matches to the setting of the stored area
code, the dialed numbers can be 7
digits only.
• Area Code + 7 digits without a 1 prefix:
If the area code of the Caller ID number
matches to the setting of the stored area
code, the dialed numbers can be Area
Code + 7 digits.
• 10 digits without a 1 prefix:
If the area code of the Caller ID number is
different from the stored area code, the
dialed numbers can be 10 digits without a
1 prefix.
• 10 digits with a 1 prefix:
If the area code of the Caller ID number is
different from the stored area code, the
dialed numbers can be 1 + 10 digits.
When reviewing the Caller ID information, press
ENTER to display the phone number in a
different format.
TELEPHONE OPERATIONS
