Regulatory Compliance
22
Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of
the FCC rules and the requirements adopted
by the ACTA. On the bottom of this equip-
ment is a label that contains, among other
information, a product identifier in the
format US:AAAEQ##TXXXX. If requested,
this number must be provided to the tele-
phone company.
b) A plug and jack used to connect this
equipment to the premises wiring and tele-
phone network must comply with the appli-
cable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone
cord and modular plug, RJ11C USOC, is pro-
vided with this product. It is designed to be
connected to a compatible modular jack that
is also compliant. See installation instructions
for details.
c) The REN is used to determine the number
of devices that may be connected to a tele-
phone line. Excessive RENs on a telephone
line may result in the devices not ringing in
response to an incoming call. In most but
not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number
of devices that may be connected to a line,
as determined by the total RENs, contact
the local telephone company. For products
approved after July 23, 2001, the REN for
this product is part of the product identifier
that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN
without a decimal point (e.g., 03 is a REN of
0.3). For earlier products, the REN is sepa-
rately shown on the label.
d) If this telephone equipment causes harm to
the telephone network, the telephone compa-
ny will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn’t practical, the tele-
phone company will notify the customer as
soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if
you believe it is necessary.
e) The telephone company may make chang-
es in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the telephone
company will provide advance notice in
order for you to make necessary modifica-
tions to maintain uninterrupted service.
f) If trouble is experienced with this telephone
equipment, for repair or warranty informa-
tion, please contact Clarity, 1-800-552-3368.
If the equipment is causing harm to the tele-
phone network, the telephone company may
request that you disconnect the equipment
until the problem is resolved.
g) This telephone equipment is not intended
to be repaired and it contains no repairable
parts. Opening the equipment or any attempt
to perform repairs will void the warranty. For
service or repairs, call 1-800-552-3368.
