Radio Operations
27
VX709E
English
Owner
’s ma
nua
l
●
Using the Preset List screen
1. Touch the [
Home
] or [
Trav
] key to select the
Home or Travel mode.
2. Touch the [
List
] key to display the Preset List
screen.
3. Touch the desired Band key to select the
band.
4. Touch the corresponding Preset key to recall
the stored station.
• Touching and holding the desired Preset
key for more than 2 seconds will store the
current station to the preset memory.
5. Touch the [
Back
] key to return to the previous
screen.
Manual memory
1. Touch the [
Home
] or [
Trav
] key to select the
Home or Travel mode.
2. Touch the [
List
] key to display the Preset List
screen.
3. Touch the desired Band key to select the
band you wish to store.
4. Tune in the station you wish to store using the
seek tuning, manual tuning, or preset tuning.
5. Touch and hold the desired Preset key you
wish to store the current station for more than
2 seconds.
Auto Store
The Auto Store is a function for storing up to 8
stations that are automatically tuned in
sequentially. If 8 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
The Auto Store function works only in the Travel
mode.
1. Touch the [
Trav
] key to select the Travel
mode.
2. Touch the [
List
] key.
3. Touch desired Band key to select the band.
4. Touch the [
AS
] key to start scanning stations.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
• “
AS
” appears during scanning stations. To
stop the scanning, touch the [
AS
] key again.
Scrolling radio text
When the current station broadcasts text data, it
is displayed on the TUNER mode screen. When
the text is longer than the text area, you can
confirm the entire text by scrolling it.
1. Touch the [
x
] key displayed at the right of the
text area.
The text will scroll once.
About the RDS (Radio Data
System)
This unit has a built in RDS decoder system that
supports broadcast stations transmitting RDS
data. This system can display the name of the
broadcast station being received (PS), and can
automatically switch to the broadcast station with
the best reception as you move long distances
(AF switching). Also, if a traffic announcement or
program type information is broadcast from an
RDS station, no matter what mode you are in, this
broadcast is received. Additionally, if EON
information is received, this information enables
automatic renewal of other preset stations on the
same network and interruption of traffic
announcement and/or chosen program type from
other stations (TP). This function is not available
in some areas.
“
AF
” : Alternative Frequency
“
PS
” : Program Service Name
“
PTY
” : Program Type
“
EON
”: Enhanced Other Network
“
TP
” : Traffic Program
• The RDS interrupt does not function during AM
(MW/LW) radio reception.
