Clarion VRX925VD, Руководство по обслуживанию

Страница: 2 / 43

- 2 -
VRX925VD
To engineers in charge of repair or
inspection of our products.
Before repair or inspection, make sure to follow
the instructions so that customers and Engineers
in charge of repair or inspection can avoid suf-
fering any risk or injury.
1. Use specified parts.
The system uses parts with special safety features against
fire and voltage. Use only parts with equivalent charac-
teristics when replacing them.
The use of unspecified parts shall be regarded as re-
modeling for which we shall not be liable. The onus of
product liability (PL) shall not be our responsibility in cases
where an accident or failure is as a result of unspecified
parts being used.
2. Place the parts and wiring back in their original positions
after replacement or re-wiring.
For proper circuit construction, use of insulation tubes,
bonding, gaps to PWB, etc, is involved. The wiring con-
nection and routing to the PWB are specially planned
using clamps to keep away from heated and high voltage
parts. Ensure that they are placed back in their original
positions after repair or inspection.
If extended damage is caused due to negligence during
repair, the legal responsibility shall be with the repairing
company.
3. Check for safety after repair.
Check that the screws, parts and wires are put back se-
curely in their original position after repair. Ensure for
safety reasons there is no possibility of secondary
ploblems around the repaired spots.
If extended damage is caused due to negligence of re-
pair, the legal responsibility shall be with the repairing
company.
4. Caution in removal and making wiring connection to the
parts for the automobile.
Disconnect the battery terminal after turning the ignition
key off. If wrong wiring connections are made with the
battery connected, a short circuit and/or fire may occur.
If extensive damage is caused due to negligence of re-
pair, the legal responsibility shall be with the repairing
company.
5. Cautions regarding chips.
* Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.Confidential Unpublished Works.c 1992-
1997 Dolby Laboratories.All rights reserved.
* "DTS" are registered trademarks of Digital Theater
Systems,Inc.
* Specifications and design are subject to change without
notice for further improvement.
NOTES
* Use a CeNET extension cable that is less than 20m in
length.(including the Y-adapter CCA-519)
* We cannot supply PWB with component parts in prin-
ciple. When a circuit on PWB has failure , please repair
it by component parts base. Parts which are not men-
tioned in service manual are not supplied.
* This DVD player ca play the following discs.
DVD video discs,Video CDs,CD text,Audio CDs.
* This DVD video player cannot playback DVD-R,DVD-
RAM,DVD-ROM,CD-ROM,CD-RW,Photo CDs.
* This DVD player plays NTSC discs and PAL discs only
and cannot be used for playback of SECAM discs.
* Some CDs recorded in CD-R mode may not be usable.
* This slide mechanism is used the special adjustment jig
for repair.
COMPONENTS
QC-6810B-B/QC-6810K-B/K-C
Main unit ----------- 1
Remote control unit RCB-161-200 1
Battery(SUM-3) ----------- 2
Universal mounting bracket 300-9035-01 1
DCP case 335-6707-00 1
Antenna jumper 093-1465-03 1
Power supply lead(18P) 854-6392-50 1
Power supply lead(2P) 854-6393-51 1
Extension lead(20P to 20P) 855-0553-00 1
Outer escutcheon 940-7715-05 1
Parts bag -----------
Electro tap 060-0018-00 1
Machine screw(M4
×
3) 714-4003-87 4
Machine screw(M5
×
8) 714-5008-41 4
Sems hex. bolt(M5
×
8) 716-0496-01 5
Parts bag -----------
Hook plate 330-8216-01 2
Cord clamp 335-0833-01 1
Spacer 345-3653-01 1
Screw 716-0726-01 1
Parts bag -----------
Mounting bracket 300-7362-20 2
Canoe clip 335-2515-00 4
Machine screw(M4
×
8) 714-4008-80 4
Parts bag -----------
DCP lock spacer 345-5174-00 1
CAUTIONS
Use of controls,adjustment or performance of procedures
other than those specified herein,may result in hazardous
radiation exposure.
The COMPACT DISC player and MINI DISC player should
not be adjusted or repaired by anyone except properly quali-
fied service personnel.