background image

12

VMA7483

English

Owner

’s Manual

Starting Up and Retracting the LCD Panel

5. OPERATIONS

Notes

• The angle of the LCD panel cannot be ad-

justed. Attempts to adjust the angle could dam-
age the unit.

• When the LCD panel stops half-way out, press

the LCD panel OPEN/CLOSE button to retract
it. Then press it once again to open it.

• Check for any object that maybe in the way

before trying to re-open panel.

• Do not move the LCD panel Lock button to the

LOCK ON” position when the LCD panel is
open as the LCD panel and the LCD panel lock
lever will interfere with each other when the
panel is retracted, which could damage the
unit.

WARNING

To prevent battery depletion, operate the
unit with the engine on.

CAUTION

Be sure not to get your fingers caught be-
tween the LCD panel and the unit or  the
instrument panel.

Opening the LCD Panel

1. Turn the ignition key to ACC or ON.

2. Slide the LCD panel lock button to “LOCK

OFF”.

Note:

The LCD panel cannot be opened when the LCD
panel lock button is in the “LOCK ON” position.

3. Hold down the LCD panel OPEN/CLOSE but-

ton on the remote control for 1 second.
This action opens the LCD panel and turns it
on.

LCD panel lock button

(LOCK OFF)

(LOCK ON)

LCD panel
OPEN/CLOSE button

Turning off the panel

Press the power button to turn off the panel.

Содержание VMA7483




















Отзывы: