8
VMA643
English
Owner
’s
Manual
●
How regular 4:3 images are displayed
changes according to the screen mode as
follows
Changing settings
F.WIDE (full wide) mode
CINEMA 1 mode
CINEMA 2 mode
NORMAL mode
WIDE mode
The overall image is elongated
horizontally.
The top and bottom of the image
become out of view.
The top of the image becomes
out of view.
Black stripes appear at the left
and right edges of the image.
Images at the left and right sides of
the screen are elongated horizontally.
■
Switching the video format
Both PAL and NTSC images can be viewed on
this monitor.
• The default is “
AUTO
”.
Note:
• This monitor does not support SECAM and other
video formats.
1. As described in “
Selecting the setting
item
”, display setup screen 2/2.
ADJ 2/2
WIDE MODE F.WIDE
VISUAL N/P AUTO
2. Select the desired screen mode using the
(search) buttons, and select one of
AUTO, PAL and NTSC using the VOLUME
(–, +) buttons.
ADJ 2/2
WIDE MODE F.WIDE
VISUAL N/P
AUTO
PAL
NTSC
3. Hold down the ADJUST/VISUAL button for 1
second or longer to return to the regular
screen.
• If the state of images is poor when “AUTO”
is selected, a probable cause is that the
video format is being mistakenly
recognized. Select either “PAL” or “NTSC”
as the video format to match the
equipment you are using.
• When “AUTO” is selected, images on the
monitor are sometimes disrupted for about
one second while the image signal that is
input is being recognized.
