12
VMA643
English
Installation and W
ire
connetion Manual
INSTALLATION
Installing the Monitor Stand/Display Unit
1. Lift up the guide holder while pressing down
on the unlock knob to remove the guide
holder.
2. Tighten the screw on the guide holder using
the Allen key provided with the display unit.
Guide holder
Unlock knob
Allen key (provided)
Guide holder
3. Install the display unit on the monitor stand,
and determine its attachment position.
Insert the guide holder into the monitor stand
until you hear it click into place.
Determine the attachment position after
adjusting the angle.
4. Align the stand base with the profile of the
attachment surface and bend the stand
base.
Notes:
• Bend the stand base so that it contact-fits the
profile of the attachment surface. Gaps in the
attachment may cause the stand base to
come away from the attachment surface.
• Do not remove the peel-off sheet from the
attachment surface.
Guide holder
Adjust the
angle of the
stand.
Stand base
4.
