background image

Problem:

Picture does not appear.

Solution:

The TV Tuner is not set to TV mode (when using the TTX001) – Set the

function to TV mode.

The TV Tuner is set to VTR mode (when using the TTX001) – In the VTR

mode, no picture appears if no video signal is being input to the VIDEO IN
terminal of the tuner.

Problem:

Picture has shadow or shadows.

Solution:

Signal condition is poor – This may be due to signals reflected off

mountains or buildings. Check again in a different place or direction.

Problem:

Screen is dark.

Solution:

The brightness control is not set properly – Adjust the brightness setting. 

Usage conditions are poor – This may happen if the temperature in the

vehicle is below 30 degrees F or above 113 degrees F. Check again when
the temperature is between 30 – 113 degrees F.

Problem:

Colors are pale or hue is poor.

Solution:

The picture adjustment is not adjusted properly – Adjust the picture.

Problem:

Stripes or spots are on the picture.

Solution:

Interference signals – This may be caused by interference from other

vehicles, trains, high voltage lines, neon lights, etc.  Check again in another
place.

PRODUCT SPECS

9

Type:  
Size:
Pixels:
Power Source Voltage:
Power Consumption:
Operation Temperature:

Color TFT active matrix LCD Display 
11.3" (actual panel size)
800x600 screen resolution
DC 11-15V
1.5Amax. (1.5Aor less) 
30 - 113 degrees F

Содержание VMA1131













Отзывы: