Page 16 - MS850 Installation Manual
Step
1
2
3
4
5
6
7
8
9
10
Function
Ignition Controlled Door Locking
Ignition Controlled Door Unlocking
Ignore Dome Light Delay
Audible Tamper Alert Report
Door Unlock Pulse
Automatic Rearming
Entry Delay for Passive Arming
Yellow/white Wire Operation
Passive Door Locking
Transmitter Operating Mode
solid*
ON
ON
OFF
ON
single
OFF
OFF
Aux.
OFF
Standard
flashing
(quickly)
OFF
OFF
ON
OFF
double
ON
15 sec
Aux. w/ Trunk
Bypass
ON
Convenience
flashing
(slowly)
Dome Light
Control
Driver Door
Priority
Status LED
Button 2
Button 1
* default setting
Programmable System Parameters
1. Ignition Controlled Door Locking. Selects whether or not the system automatically locks
the doors when the ignition is turned on. When selected, the Ignition Controlled Door
Locking feature will automatically lock the doors 10 seconds after the ignition key is turned
on.
To prevent the keys from being locked inside the vehicle when Ignition Controlled Door
Locking is on:
• The system will not lock the doors if any door is open when the ignition is turned on.
• The system will not lock the doors if any door is opened during the 10 second
countdown.
2. Ignition Controlled Door Unlocking.
Selects whether or not the system automatically
unlocks the doors when the ignition is turned off. When selected, the Ignition Controlled
Door Unlocking feature will automatically unlock the doors when the ignition key is turned
off.
3. Ignore Dome Light Delay. For use with vehicles equipped with a timed dome light circuit that
stays on after the door has been closed. When programmed ON, the dome light will be
ignored during arming to prevent the system from responding with an open zone indication.
4. Audible Tamper Alert Report. When Audible Tamper Alert is selected, the siren will chirp to
indicate which zone had triggered the system, upon disarming.
If the system was triggered, the siren will emit one long chirp, followed by a series of short
chirps indicating the violated zone.
installation_850.qxd 9/10/99 6:26 PM Page 16
