Page 10 - MS850 Installation Manual
Remote Transmitter Layout
Each system comes with 2 Remote Transmitters, pre-programmed to operate in the Ungo
Standard Mode and will Arm and Disarm the system
with chirp confirmation using Button 1.
Transmitter Operating Modes
The MS850 can be configured to work with the remote transmitters in one of three ways, Ungo
Standard Mode (default), Convenience Mode, or Driver Door Priority Mode. To select or change
the transmitter operating mode, see
Programming.
Ungo Standard Mode
Button 1 Arms and Disarms the system. This button will also lock and unlock the doors when
the system is in Valet mode.
Button 2 controls the system’s Auxiliary Function.
When Buttons 1 and 2 are pressed
together, the systems Chirp confirmation setting will be
reversed.
If the system was programmed to arm the system
with chirp, Pressing Buttons 1 and 2 together will arm the
system
without chirp.
If the system was programmed to arm the system
without chirp, pressing Buttons 1 and 2 together will arm the
system
with chirp.
ARM / DISARM
F1
BUTTON 1
BUTTON 2
Button 1
Button 2
LED
Remote Transmitters
installation_850.qxd 9/10/99 6:26 PM Page 10
