PU-2471A
PU-2472B, C
- 3 -
EXPLANATION OF IC
052-1170-13
uPD784216BYGC-110-8EU
CD & Radio System Controller
1.Terminal Description
pin
1: KI 1
: IN : Key scan signal input.
pin
2: KI 2
: IN : Key scan signal input.
pin
3: KI 3
: IN : Key scan signal input.
pin
4: KI 4
: IN : Key scan signal input.
pin
5: KI 5
: IN : Key scan signal input.
pin
6: NU
: - : Not in use.
pin
7: NU
: - : Not in use.
pin
8: NU
: - : Not in use.
pin
9: VDD
: - : Positive supply voltage.
pin 10: X 2
: - : Crystal connection.
pin 11: X 1
: - : Crystal connection.
pin 12: VSS
: - : Negative supply voltage.
pin 13: NU
: - : Not in use.
pin 14: NU
: - : Not in use.
pin 15: RESET
: IN : Reset signal input.
pin 16: SBSY
: IN : Sub code sync input.
pin 17: VAN INT
: IN : The interrupt signal input from the VAN
Bus.
pin 18: KI 0
: IN : Key scan signal input.
pin 19: RDS CLK
: IN : RDS clock pulse input.
pin 20: RDS DATA
: IN : RDS serial data input.
pin 21: BU DET
: IN : Backup detection signal input.
pin 22: +VAN DET
: IN : +VAN ON signal input.
pin 23: A VDD
: - : Positive supply voltage for the Analog sec-
tion.
pin 24: A Vref
: IN : Reference voltage for ADC.
pin 25: NU
: - : Not in use.
pin 26: FM S METER
: IN : The input terminal of Internal A/D convert-
er to monitor the radio field strength for
FM.
pin 27: DIAG PAHAN
: IN : Phantom circuit status input.
pin 28: NU
: - : Not in use.
pin 29: IF BAND
: IN : IF band width.
pin 30: NU
: - : Not in use.
pin 31: NU
: - : Not in use.
pin 32: MUTE DET
: IN : The input terminal of the internal ADC for
sensing the backup voltage.
pin 33: A VSS
: - : Analog ground.
pin 34: NU
: - : Not in use.
pin 35: NU
: - : Not in use.
pin 36: A Vref
: IN : Reference voltage for ADC.
pin 37: MISO
: IN : The serial data input from the VAN control
IC.
pin 38: MISIO
: O : The serial data output to the VAN control
IC.
pin 39: SCLK
: O : The clock pulse output to the VAN control
IC.
pin 40: NU
: - : Not in use.
pin 41: NU
: - : Not in use.
pin 42: A MUTE
: O : The audio mute signal output.
pin 43: S SO
: O : Slave chip select signal output.
pin 44: BEEP
: O : Beep out.
pin 45: SDAT
: O : The serial data output to the tuner pack.
pin 46: VAN RESET
: O : The reset pulse output to VAN control IC.
pin 47: S CL 1
: O : The clock pulse output for the tuner pack.
pin 48: 12V SW
: O : ON signal output to the external power
supply.
pin 49: 5V REM
: O : ON signal output to the 5V power supply.
pin 50: 14V REM
: O : ON signal output to the 14V power supply.
pin 51: +VAN ON
: O : +VAN ON signal output.
pin 52: VAN WU
: O : The Wake up signal output to VAN-BUS-
IC.
pin 53: TEL MUTE
: IN : Telephone mute command input.
pin 54: CD 8V ON
: O : ON signal output to the CD 8V power sup-
ply.
pin 55: NU
: - : Not in use.
pin 56: S DA CO
: O : The serial data output to the CASP IC.
pin 57: S CLK CO
: O : The clock pulse output to the CASP IC.
pin 58: NU
: - : Not in use.
pin 59: NU
: - : Not in use.
pin 60: NU
: - : Not in use.
pin 61: NU
: - : Not in use.
pin 62: NU
: - : Not in use.
pin 63: NU
: - : Not in use.
pin 64: NU
: - : Not in use.
pin 65: NU
: - : Not in use.
pin 66: NU
: - : Not in use.
pin 67: NU
: - : Not in use.
pin 68: NU
: - : Not in use.
pin 69: NU
: - : Not in use.
pin 70: NU
: - : Not in use.
pin 71: NU
: - : Not in use.
pin 72: VSS
: - : Negative supply voltage.
pin 73: NU
: - : Not in use.
pin 74: CD CHO
: O : CD check signal output.
pin 75: CD DET
: IN : CD mechanism is connected = "H".
pin 76: No Exp
: - : No explanation.
pin 77: No Exp
: - : No explanation.
pin 78: No Exp
: - : No explanation.
pin 79: No Exp
: - : No explanation.
pin 80: No Exp
: - : No explanation.
pin 81: VDD
: - : Positive supply voltage.
pin 82: DIMMER CNT
: O : Dimmer control signal output.
pin 83: No Exp
: - : No explanation.
pin 84: No Exp
: - : No explanation.
pin 85: No Exp
: - : No explanation.
pin 86: No Exp
: - : No explanation.
pin 87: No Exp
: - : No explanation.
pin 88: No Exp
: - : No explanation.
pin 89: No Exp
: - : No explanation.
pin 90: No Exp
: - : No explanation.
pin 91: No Exp
: - : No explanation.
pin 92: VOLAI
: IN : Volume control pulse input from the rotary
encoder.
pin 93: VOLBI
: IN : Volume control pulse input from the rotary
encoder.
pin 94: VPP
: - : Connect to ground.
pin 95: CD 5V ON
: O : Power supply control signal output for the
5V power supply of the CD mechanism.
pin 96: AM ON
: O : AM ON flag output.
pin 97: KO 0
: O : Key scan output terminal.
pin 98: KO 1
: O : Key scan output terminal.
pin 99: KO 2
: O : Key scan output terminal.
pin100: KO 3
: O : Key scan output terminal.