- M2-
929-0374-81
1
CD-PWB-ASSY
5
2
3
4
SIDE-P-ASSY-F
Switches
SW-LINK
DISASSEMBLY
How to remove "CD-PWB-ASSY"
1. Add +5V to "U+" terminal of UD-MOTOR-ASSY,then
SIDE-P-ASSY-F moves outside of CD-PWB.
2. Release four FPCs.
3. Remove three screws
4. Remove the washer.
5. Remove SW-H-PLATE and SW-LINK, and remove CD-
PWB-ASSY.
*
When assembling, match
SW LINK to three switches.
How to remove "DISCHOLDER UNIT"
1. Remove eight screws.
2. Remove the FPC.
3. Remove UPPER UNIT ASSY.
4. Remove two C-RINGs, and remove DISCHOLDER
UNIT.
1
1
2
3
DISCHOLDER UNIT
4
pin 81: TEST 3
: IN : For the test.
pin 82: TEST 4
: IN : For the test.
pin 83: REQ O
: O : Transmit request signal output.
pin 84: I2C SDA
:I/O: I2C serial data input/output.
pin 85: I2C SCL
:I/O: I2C serial clock input/output.
pin 86: ACC DET
: IN : ACC detection signal input.
pin 87: NU
: - : Not in use.
pin 88: SW 1
: IN : The switch signal input.
pin 89: VCC
: - : Positive voltage supply.
pin 90: SW 2
: IN : The switch signal input.
pin 91: VSS
: - : Negative voltage supply.
pin 92: SW 3
: IN : The switch signal input.
pin 93: SW 4
: IN : The switch signal input.
pin 94: NU
: - : Not in use.
pin 95: PT 1
: IN : The photo sensor signal input.
pin 96: PT 2
: IN : The photo sensor signal input.
pin 97: PT 3
: IN : The photo sensor signal input.
pin 98: PT 4
: IN : The photo sensor signal input.
pin 99: PT 5
: IN : The photo sensor signal input.
pin100: Vref H
: - : Reference voltage.