60
NZ502E
English
English
Owner’
s Manual
English
Owner’
s Manual
6. Cautions on Wiring
1. Be sure to turn the power off before wiring.
2. Be particularly careful where you route the wires.
Keep them well away from the engine, and exhaust pipe, etc. Heat may damage the wires.
3. If the fuse should blow, check to see if the wiring is correct.
If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE).
4. To replace the fuse, remove the old fuse on the back of the unit and insert the new one. (Figure 8)
NOTE:
There are various types of fuse holder. Do not let the battery side touch other metal parts.
Figure 8
Fuse (15A FUSE)
After the connection, fix the cord by a clamp
or insulation tape for protection.
Fuse holder
CAUTION
Содержание NZ502E
Страница 65: ...NZ502E NP402E ...