Clarion NX706E, Руководство пользователя

Страница: 38 / 164

37 NX706E
English
English
Owner’
s Manual
English
Owner’
s Manual
14. TUNER OPERATIONS
The tuner in this head unit contains RDS
(Radio Data System) in FM band.
Listening to the Tuner
1. Touch the [Tuner] button on the main menu display.
The tuner mode screen is displayed.
2. Touch the [FM1/FM2/FM3/AM] button to select the
radio band. Each time the button is touched, the
radio reception band changes in the following order:
FM1->FM2->FM3->AM->FM1...
1 - Preset Scan button
2 - Seek down button
3 - Seek up button
4 - Step down button
5 - Step up button
6 - Frequencies display
7 - System time
8 - Bluetooth status indicator
9 - Preset channel list
10 - DX/Local indicator
11 - Band button
12 - Shortcut button
13 - Option button
Seek Tuning
1. Touch the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the
[ ]
or
[ ]
button
• When the [ ] button is touched, the station is
searched in the direction of higher frequency.
• When the [ ] button is touched, the station is
searched in the direction of lower frequency.
Step Tuning
1. Touch the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the
[ ]
or
[ ]
button in frequency menu to
tune up or down by one step.
Recalling a preset station
1. Touch the [FM1/2/3/AM] button to select the desire
band (FM or AM) on the tuner.
2. Press the preset station (1 to 6) on Preset list.
Manual memory
1. Touch the desired band button to select the band
you wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3. Touch and hold the desired Preset button you want
to store for about 2 seconds.
RDS Function Setting
Press the Option [ ] to set the RDS operation.
note:
The RDS operation does not work during AM radio
reception.
1. TA (Traffic Announcement) Function
When a traffic announcement broadcast starts during
the TA standby mode, the traffic announcement
broadcast is received as higher priority regardless of
the current function mode,so you can listen to it. The
Traffic Program (TP) automatic tuning is also available.
Setting TA Standby Mode
Turn TA switch to ON, TA standby mode is set and
“TA” will be displayed at the top of the screen.
When an RDS broadcast station with traffic
announcement program is received, “TP” will be
displayed at the top of the screen.
Note: If no TP station is received this system continues
the search operation. Performing the above procedure
again makes the “TA” turns to off, and stops TP
station searching.
Canceling a Traffic Announcement
Broadcast
Press the [Cancel] button while a Traffic
Announcement broadcast is being received.
The Traffic Announcement broadcast reception is
canceled, and the system goes into the TA standby
mode.
Canceling TA Standby Mode
When “TA” is displayed on the screen, turn TA switch
to OFF, “TA” on the screen goes off, and the TA
standby mode is canceled.
Volume Setting of TA
The volume of TA can be set during TA interruption.
11
12
7 8 9 10 13
2
3
4
6
5
1