Clarion NX509E, Руководство пользователя и инструкции по установке

Страница: 50 / 71

48
NX509E
English
Owner
’s ma
nua
l
●
Adjusting the Bass
●
Adjusting the Mid
●
Adjusting the Treble
❏
Adjusting the Balance/Fader
❏
Setting the Sub Woofer
Control
You can adjust the volume output to the Sub
Woofer.
• The factory default setting is “
0 ”.
❏
Setting the Sub Woofer Phase
You can reverse the phase of the Sub Woofer
output signal.
• The factory default setting is “
Normal ”.
❏
Adjusting the High Pass Filter
You can adjust the cut-off frequency of the High
Pass Filter for the front/rear speaker output.
• The factory default setting is “
Through ”.
3-4. Touch the [ Bass ] key.
3-5. Touch the [ – ] or [ + ] key of the desired item
to adjust the effect level.
Gain: –7 to +7
• The factory default setting is “ 0 ”.
Frequency: 50Hz, 100Hz, 200Hz
• The factory default setting is “ 100Hz ”.
Q: 0.7, 1, 1.4, 2
• The factory default setting is “ 1 ”.
3-4. Touch the [ Mid ] key.
3-5. Touch the [ – ] or [ + ] key of the desired item
to adjust the effect level.
Gain: –7 to +7
• The factory default setting is “ 0 ”.
Frequency: 500Hz, 1kHz, 2kHz
• The factory default setting is “ 1kHz ”.
Q: 0.7, 1, 1.4, 2
• The factory default setting is “ 1 ”.
3-4. Touch the [ Treble ] key.
3-5. Touch the [ – ] or [ + ] key of the desired item
to adjust the effect level.
Gain: –7 to +7
• The factory default setting is “ 0 ”.
Frequency: 5kHz, 10kHz, 15kHz
• The factory default setting is “ 10kHz ”.
Q: 0.7, 1, 1.4, 2
• The factory default setting is “ 1 ”.
3-1. Touch the [ BAL/FAD ] key to display the
BAL/FAD tab screen.
3-2. Touch the [
[
] or [
]
] key of the Balance item
to adjust the balance level.
[
[
]:
Emphasizes the sound from the left
speakers.
[
]
]:
Emphasizes the sound from the right
speakers.
Adjustment range: left 12 to right 12
• The factory default setting is “
0 ”.
3-3. Touch the [
{
] or [
}
] key of the Fader item
to adjust the fader level.
[
{
]:
Emphasizes the sound from the front
speakers.
[
}
]:
Emphasizes the sound from the rear
speakers.
Adjustment range: front 12 to rear 12
• The factory default setting is “
0 ”.
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [ – ] or [ + ] key of the Sub Woofer
Ctrl item to adjust the output level.
Setting range: –6 to +6
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [ Reverse ] or [ Normal ] key of the
Sub Woofer Phase item to select the phase
setting.
3-1. Touch the [ Others ] key to display the Others
tab screen.
3-2. Touch the [
[
] or [
]
] key of the High Pass
Filter item to adjust the setting.
Settings: Through, 60Hz, 90Hz, 120Hz