•
:
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for cars is allowed.
•
Private roads and resident-only roads are used only they are inevitable to reach
the destination.
•
Walkways are excluded from routes.
•
:
•
All manoeuvres are available in intersections.
•
Directional constraints are taken into account the way that opposite direction is
allowed with a low speed.
•
A private road is used only if the destination is there.
•
Walkways are excluded from routes.
•
:
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for buses is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
•
:
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
Route Planning Method types:
Button
Description
Gives a quick route if you can travel at or near the speed limit on all
roads. Usually the best selection for fast and normal cars.
Gives a short route to minimise the distance to travel. It can be practical
for slow vehicles. Searching for a short route regardless of the speed,
this route type is rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption
data given in Route settings (page 88). Travel cost and CO
2
emission
calculations are estimations only. They cannot take elevations, curves
and traffic conditions into account.
90 NX504E English