Clarion N.I.C.E. 430 Скачать руководство пользователя страница 62

Страница: 62 / 158

Increase the separation between the N.I.C.E. 430 and receiver.

Connect the N.I.C.E. 430 into an outlet different from which the receiver is
connected to.

Consult and authorized Clarion dealer or service station.

Any changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the N.I.C.E. 430.

Please note:

The use of a non-shielded interface cable with the N.I.C.E. 430 is prohibited.

Canada
Canadian Department of Communications

Radio Interference Regulations Class B Compliance Notice

This Class B digital apparatus meets all requirements of the Canada
Interference-Causing equipment regulations.

Cet appareil numérique de Classe B respecte toutes les exigences du Règlement
Canadien sur le matériel brouileur.

9.2

Safety Precautions

Prolonged listening of music in maximum volume can damage the ears.

The use of headphones other than those recommended/supplied can cause
hearing impairment due to excessive sound pressure.

About Charging

Use only the charger supplied with the N.I.C.E. 430. Use of another type will
result in malfunction and/or danger.

The N.I.C.E. 430 is intended to be supplied by a LISTED Power Unit marked
with “LPS”, “Limited Power Source” and output rated + 5 V dc / 1.0 A”.

Use a specified battery in the N.I.C.E. 430.

Содержание N.I.C.E. 430































































































































































Результаты поиска

Содержание N.I.C.E. 430

Отзывы:

Похожие инструкции для N.I.C.E. 430

Бренды по названию

Популярные бренды

Clarion N.I.C.E. 430, Руководство пользователя

Результаты поиска

Содержание N.I.C.E. 430

Отзывы:

Похожие инструкции для N.I.C.E. 430

Бренды по названию

Популярные бренды