MAX667VD
- 2 -
To engineers in charge of repair or in-
spection of our products.
Before repair or inspection, make sure to follow the
instructions so that customers and Engineers in charge
of repair or inspection can avoid suffering any risk or
injury.
1. Use specified parts.
The system uses parts with special safety features against fire
and voltage. Use only parts with equivalent characteristics
when replacing them.
The use of unspecified parts shall be regarded as remodeling
for which we shall not be liable. The onus of product liability
(PL) shall not be our responsibility in cases where an accident
or failure is as a result of unspecified parts being used.
2. Place the parts and wiring back in their original positions after
replacement or re-wiring.
For proper circuit construction, use of insulation tubes, bond-
ing, gaps to PWB, etc, is involved. The wiring connection and
routing to the PWB are specially planned using clamps to keep
away from heated and high voltage parts. Ensure that they are
placed back in their original positions after repair or inspec-
tion.
If extended damage is caused due to negligence during re-
pair, the legal responsibility shall be with the repairing com-
pany.
SPECIFICATIONS
FM Tuner section
Frequency range:
87.0MHz to 108.0MHz
Usable sensitivity:
9dBf
50dB Quieting sensitivity: 15dBf
Alternate channel selectivity: 70dB
Stereo separation (1kHz):32dB
Frequency response (-3/+3 dB): 30Hz to 15kHz
AM Tuner section
Frequency range:
531kHz to 1629kHz
Usable sensitivity:
28 dBuV
DVD Player section
System:
Digital versatile disc system with
CDDA capable
Usable discs:
DVD video disc, Compact disc
Frequency response:
20Hz to 20kHz(CD)(-1/+1dB)
Signal to Noise ratio:
100dB(1kHz)
Dynamic range:
100dB(1kHz)
Distortion:
0.006%
Audio amplifier section
Maximum power output: 50Wx4
Rate power output:
17Wx4(20Hz to 20kHz,1%,4ohm)
Speaker impedance:
4ohm(4 to 8ohm)
Input section
Audio input:
130-60/+60mVrms(High)
600-80/+80mVrms(Mid)
840-100/+100mVrms(Low)
(input impedance 10kohm or
greater)
Video input:
1.0-0.2/+0.2Vp-p
(input impedance 75ohm)
Video output section
Video output:
1.0-0.2/+0.2Vp-p
(output impedance 75ohm)
LCD Monitor section
Screen size:
7-inch wide type
156.2mm Width x 82.3mm Height
Display method:
Transmission type TN liquid crys-
tal display
Drive method:
TFT(thin-film transistor) active
matrix driving
Pixels:
336,960(480x3[RGB]x234)
General section
Power source voltage:
14.4V DC
(10.8 to 15.6V allowable)
Ground:
Negative
Current consumption:
4.0A(1W)
Auto antenna rated current: 500 mA less
Dimensions(mm):
Main unit;
178(W)x100(H)x160.0(D)
Remote Control Unit;
54(W)x28.8(H)x155(D)
Weight:
Main Unit; 2.6kg
Remote Control Unit; 100g
(including battery)
1
2
3
4
5
8-1
8-2
8-3
6
7
8
COMPONENT
QZ-6070K-A/K-B/K-C
1.
Main unit
-----------
1
2.
Remote controller
RCB-177-600
1
3.
Battery(SUM-3)
-----------
2
4.
Finisher
383-0591-00
1
5.
RCA cap
345-3799-20
12
6.
Extension lead
854-6420-51
1
(15A Fuse
120-0150-00
1)
7.
RCA pin cord
855-5543-50
1
8.
Parts bag
-----------
1
8-1.
Electro tap
060-0018-00
1
8-2.
Hexagonal screw(M5x8)
716-0496-51
8
8-3.
Flat head screw(M5x8)
714-5008-4B
8
