11
English
M502
• Answering a call
You can answer an incoming call by pressing
the
[CONTROL]
knob.
* Press the
[CONTROL]
knob (right) to reject
an incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their car stereo wirelessly and listen to the
tracks through the car’s speakers. Please
consult your nearest
Clarion
dealer for more
information on the product of wireless audio
streaming transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy on
the song playback.
Audio streaming may or may not resume
after telephone interrupt as this is
dependent on mobile phone.
System will always return to Radio mode if
audio streaming is disconnected.
Note:
Be sure to read the chapter “Pairing” before
proceeding.
Play / Pause a track
1. Push the
[CONTROL]
knob (down) to
pause audio playback.
2. To resume audio playback, push the
[CONTROL]
knob (down) again.
Selecting a track
Track-up
1. Press the
[CONTROL]
knob (right) to move
to the beginning of the next track.
2. Each time the
[CONTROL]
knob (right)
is pressed, playback proceeds to another
track in the advancing direction.
Bluetooth Operations
Track-down
1. Press the
[CONTROL]
knob (left) to move to
the beginning of the previous track.
2. Each time the
[CONTROL]
knob (left) is
pressed, playback proceeds to previous track
in the reverse direction.
Note:
Playing order will depend on Bluetooth
audio
player. When
[CONTROL]
knob (left) is pressed,
some A2DP devices will restart the current track
depends on the duration of playback.
During music streaming playback, “
A2DP
” will
be shown on the display. Information about
tracks (e.g. the elapsed playtime, song
title, etc.) cannot be displayed on this unit. When
A2DP device is disconnected, “
DISCONNECT
”
will be shown on the display
and return to previously selected audio source.
Some Bluetooth
audio players may not have
play / pause synchronized with this unit. Please
make sure both device and main unit are in the
same play / pause status in
BT MUSIC
mode.
Press the
[CONTROL]
knob on the panel or
[SRC/ ]
button on the remote control once or
more to select “
AUX
”.
AUX is just for audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel on the right of USB slot.
AUX Input sensitivity setting
1. Press and hold the
[CONTROL]
knob .
2. Turn the
[CONTROL]
knob to select “
AUX
SENS
”.
3. If the output level of connected external
audio player is “
HIGH
”, rotate the
[CONTROL]
knob and choose “
LOW
”.
And if the output level is “
LOW
”, choose
“
HIGH
”.
AUX Operations
