CLARION M10II CONFIGURATION
GETTING STARTED GUIDE
PAGE 21
4.
CONFIGURATION
The M10II units are pre-configured to operate right out of the box. There
are also a variety of options that the user can change to adapt the M10II to a
specific situation.
The configuration software is pre-loaded into an internal EEPROM
(Electrically Erasable Programmable Read-Only Memory) in the M10II.
For updates to this software please see section
7. Technical Information
.
4.1
DEFAULT SETTINGS
The default settings that the M10II is shipped with are as follows:
•
Acknowledging is enabled (one ACK per packet)
•
Transmit filtering is turned on
•
Download filtering is turned on
•
Aging time is set to 5 minutes
•
Loop Detection is on
•
Static Table is uploading is set to off
•
Professional Addressing Mode is off
4.2
CONFIGURATION COMMANDS
Included with the radio is a diskette that contains MIImqry.exe and
Tmshow.bat. MIImqry is like M10query but includes the M10II settings of
filtering and aging. Tmshow.bat allows the user to read the table that is
stored internally in the M10II at the time of issuing the command. They
both keep log files. Both of these programs can be issued remotely. By
using these the complete configuration and stored table of any radio in the
network can be read from any location in the network. You only need to
know the MAC ID of the radio you are trying to query. Both commands
continue to issue once per second until there is a response or until a key is
hit.
The following utilities will be included on diskette for the M10II. Typing
the name followed by a question mark will show the usage syntax.
