HX-D2
23
English
Operations Common to Each Mode
Saving the filter setting/time
alignment setting/P.EQ setting
(MEMORY)
Three groups of adjustment settings made to
suit your car can be saved for both the Standard
mode and Multi mode.
∗
P.EQ settings are not saved when the Equalizer
mode is set to "
BASS/TREB
".
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select
"
SOUND
".
3. Press the [
s
] button.
4. Press the [ ] or [ ] button to select
"
MEMORY
".
5. Press the [
] button.
6. Press the [ ] or [ ] button to select
"
MEMORY1
", "
MEMORY2
", "
MEMORY3
" or
"
DEFAULT
".
∗
The factory default setting is "
DEFAULT
". This
setting can be called up but cannot be
changed to other settings.
7. Hold down the [
s
] button for about 1
second. "
SAVE?
" is displayed.
8. Hold down the [
s
] button for about 1
second. You will hear a short high-pitched
sound, and the filter settings, time alignment
settings and P.EQ settings are saved to the
memory (1 to 3) selected in step 6.
9. Press the [
ADJ
] button to return to the
previous mode.
●
To call up saved settings
At step 7, press the [
s
] button, and hold
down the [
s
] button for about 1 second when
"
LOAD?
" is displayed.
You will hear a short high-pitched sound, and
the settings are called up. Press the [
ADJ
]
button to return to the previous mode.
∗
When the Equalizer mode is set to "
BASS/TREB
",
the P.EQ settings that are called up are reflected
when the Equalizer mode setting is changed to
"
P.EQ
".
●
About settings after a reset
When the [
RESET
] button is pressed to reset
this unit, all settings set here disappear. Make a
note of the settings in the Sound Setup Memo
(page 34) to make these settings again after a
reset.
Selecting the equalizer mode
(EQ SELECT)
This item can be selected when the Audio mode
is the Standard mode or the Multi mode.
The factory default setting is "
P.EQ
".
●
Parametric equalizer mode <P.EQ>
The sound field can be adjusted by the P.EQ of
five bands. For details on P.EQ adjustment, see
"Adjusting P.EQ" (page 21).
●
Bass/treble mode <BASS/TREB>
The sound field can be adjusted by bass/treble.
For details on bass/treble adjustment, see
"Adjusting the bass/treble" (page 12).
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select "
EQ
SELECT
".
3. Press the [ ] or [ ] button to select "
P.EQ
"
or "
BASS/TREB
".
4. Press the [
ADJ
] button to return to the
previous mode.
Setting the sub-woofer/non-fader
(SUB-WOOFER/NON-FADER)
Set to "
ST
" (stereo) or "
MONO
" (monaural)
when a sub-woofer/non-fader is connected.
There is no output when "
OFF
" is set.
* The factory default setting is "
ST
".
1. Press the [
ADJ
] button.
2. Press the [
] or [
] button to select "
SUB-
WOOFER
" or "
NON-FADER
".
∗
Select "
SUB-WOOFER
" when the Audio
mode is the Standard mode or the Multi mode,
and "
NON-FADER
" when the Audio mode is
Direct mode.
3. Press the [ ] or [ ] button to select "
ST
"
(stereo), "
MONO
" (monaural) or "
OFF
".
4. Press the [
ADJ
] button to return to the
previous mode.
