Clarion HX-D2, Руководство пользователя

Страница: 16 / 31

20
HX-D2
English
About gain (G)
This function allows you to adjust how much the
output level is to be lowered.
●
Characteristics during gain adjustment
0dB
-24dB
SUB-WOOFER LOW MID HIGH
About phase (PHASE)
The factory default setting is " NOR " (forward
phase). Try switching between " NOR " (forward
phase) and " REV " (reverse phase) and select
the setting that sounds most natural to you.
Adjusting the position (TIME ALIGN)
●
About the time alignment function
This function allows you to adjust the speakers
so that any listener in the car can obtain the
same sound effect from the speakers.
∗
This item can be adjusted when the Audio mode is
the Standard mode or the Multi mode.
1. Press the [ ADJ ] button.
2. Press the [ ] or [ ] button to select
" SOUND ".
3. Press the [
s
] button.
4. Press the [ ] or [ ] button to select " TIME
ALIGN ".
5. Press the [ ] or [ ] button to select "
FRONT " or " HIGH ".
∗
Select " FRONT " when the Audio
mode is the Standard mode, and " HIGH
" when the Audio mode is the Multi mode.
6. Press the [ ] or [ ] button to select the
speaker to adjust.
* The mute function of a selected speaker can
be turned ON/OFF by pressing the [ ROTARY ]
knob while the speaker is selected.
Each press of the button switches the setting as
follows.
Operations Common to Each Mode
In the Standard mode:
FRONT
FRONT
FRONT
FRONT
REAR
REAR
SUB-W
SUB-W
7. Press the [ ] button. The setting value is
displayed.
8. Press the [
s
] button. The setting value
blinks.
9. Press the [ ] or [ ] button to set the
distance from the speaker up to the listener.
∗
The adjustment range is 0 cm to 512.4 cm (in
about 0.7 cm steps).
∗
The range can be adjusted in about 7 cm
steps by holding down the [ ] or [ ] buttons.
∗
For details, see "Appendix : Time Alignment
List" (page 32).
10.When you have finished the adjustment,
press the [
s
] button to return to the
screen in step 7. This sets the setting value.
11.Press the [ ] button to return to the screen
in step 6.
12.Repeat steps 6 to 11 to adjust the position of
each speaker.
13.Press the [ ADJ ] button to return to the
previous mode.
Blinking
In the Multi mode:
HIGH
HIGH
MID
MID
LOW
LOW
SUB-W
SUB-W