23
English
FZ409E
USB Operations
Number of files or folders
1. Up to 255 files per folder can be recognized.
Up to 512 folders can be recognized and up
to total of 130560 files can played.
2. Tracks are played in the order that they were
recorded onto a USB. (Tracks might not always
be played in the order displayed on the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
CAUTION
!
Insert and remove a USB memory device
only when the device is not being accessed.
Connecting or disconnecting the device at
the following times may result in the loss of
data:
- If the USB memory device is removed or
power is disconnected during writing to
the device.
- When the device is subjected to static
electricity or electric noise.
Do not leave a USB memory device unat-
tended in an automobile. Exposure to direct
sunlight or high temperatures may cause
deformation or other malfunction of the USB
memory device.
Connecting a USB memory device
1. Connect the USB memory device to the USB
slot.
Playback will begin from the first file recorded
on the device.
∗
If the device is not recognized, touch the
[ ]
key
to switch to the Source menu and select
the source to the device.
∗
Always insert the device fully into the connector.
Incomplete connections may cause the device
not to be recognized.
∗
Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
∗
The order in which tracks are recorded may
differ depending on the device connected (the
actual playback order may not be the same as
that indicated on your computer’s display).
To listen to tracks on a connected
USB memory device
1. Touch the [ ] key to switch to the Source
menu and select the “
USB
”. When USB
memory device is selected, playback (except
DRM files) will begin from the location at which
playback was previously stopped.
∗
When a USB memory device is connected the
USB mode will be displayed.
∗
When a USB memory device is disconnected
and then reconnected, playback will begin
from the previous position where playback is
stopped.
∗
When a USB memory device is disconnected
and then a different USB memory device is
connected, playback will begin from the first file
recorded on the device.
Folder structure
1. A USB with a folder having more than 8 hier-
archical levels will be impossible.
Selecting a track
Track-up
1. Touch the [ ] key to move to the beginning
of the next track.
2. Each time the [ ] key is touched, playback
proceeds to another track in the advancing
direction.
CAUTION
!
Do not remove the USB memory device when
the USB mode is selected, since it may result
in loss or damage to data on the USB memory
device.
Always backup and save important data on
your computer.
Pausing play
1. Touch the [ ] key to pause play. “
PAUSE
”
appears in the display.
2. To resume play, touch the [ ] key again.
2. Remove the USB memory device from the USB
slot.
To stop play
1. Touch the [ ] key and switch the function to
a source other than the USB memory device.
Downloaded from Caradio-Manual.com Manuals
