English
280-8180-00
50
DXZ958RMC
Common Operations
3. Touch
on the left of the display to
select “
TEL-SP
”.
RTN
TEL-SP
R I G H T
ADJ SETTING
4. Touch
on the right of the display to
select “
LEFT
” or “
RIGHT
”.
LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
5. Press the [
ADJ
] button to return to the
original mode.
Cellular phone interrupt
setting
If you connect this unit and your cellular phone
with a unit (Optional, TEL-002), you can listen to
your telephone calls on your car speakers.
• The factory default setting is “
OFF
”.
1. Press the [
ADJ
] button to set to the adjust
mode.
2. Touch [
SETTING
].
3. Touch
on the left of the display to
select “
TEL-SWITCH
”.
RTN
TEL-SWITCH
O F F
ADJ SETTING
4. Touch
on the right of the display.
Each time you touch, the setting changes in
the following order:
OFF
➜
ON
➜
MUTE
➜
OFF
...
OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When connecting a hands-free kit, make sure
that the setting is ON to receive the telephone
audio through the system.
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗
When listening to your calls on your car
speakers, you can adjust the volume by
turning the [
ROTARY
] knob.
MUTE:
The sound from this unit is muted during
telephone calls.
5. Press the [
ADJ
] button to return to the
original mode.
Setting the auto-volume
function
(CALIBRATE/A-VOL SENS)
You can automatically change the volume to
match your car's speed.
• The factory default setting is “
LOW
”.
1. Press the [
ADJ
] button to set to the adjust
mode.
2. Touch [
SETTING
].
3. Touch
on the left of the display to
select “
CALIBRATE
”.
RTN
CALIBRATE
[START]
ADJ SETTING
4. Accelerate to a speed of 50 km.
5. When you reach 50 km, touch [
START
].
Calibration is executed.
After 2 seconds or longer, you will hear a
long beep, and “
SUCCESSFUL
” will appear
on the display.
If you hear a short beep, this indicates that
calibration failed. Repeat the procedure from
step 4.
6. Next, adjust the sensitivity. Touch
[
SETTING
].
7. Touch
on the left of the display to
select “
A-VOL SENS
”.
RTN
A-VOL SENS
L O W
ADJ SETTING
8. Touch
on the right of the display.
Each time you touch, the setting changes in
the following order:
OFF
(no change in volume)
➜
LOW
(change
in volume: small)
➜
MID-LOW
➜
MID
➜
MID-HIGH
➜
HIGH
(change in volume:
large) ...
9. Press the [
ADJ
] button to return to the
original mode.
+DXZ958RMC_01-32-Eng.p65
05.1.21, 20:06
50
