Clarion DXZ958RMC, Руководство пользователя

Страница: 46 / 67

English
280-8180-00
46
DXZ958RMC
Common Operations
Displaying messages (MSG
INFO)
This function allows you to display a message
on the display when no operation is performed
for more than 30 seconds.
• The factory default setting is “ OFF ”.
1. Press the [ ADJ ] button to set to the adjust
mode.
2. Touch [ APPEARANCE ].
3. Touch on the left of the display to
select " MSG INFO ".
ADJ APPEARANCE
RTN
MSG I N F O O F F
4. Touch on the right of the display to
select “ ON ” or “ OFF ”.
5. Press the [ ADJ ] button to return to the
original mode.
Entering messages to display
in message information (MSG
INPUT)
• Up to 30 characters can be entered.
• The factory default setting is “
Active MatriX
Control System ”.
1. Press the [ ADJ ] button to set to the adjust
mode.
2. Touch [ APPEARANCE ].
3. Touch on the left of the display to
select " MSG INPUT ".
ADJ-APPEARANCE
RTN
MSG INPUT [ENT]
4. Touch [ ENT ].
The mode changes to the message entry
mode.
5. Touch [ ]/[ ] to determine the entry
position.
MESSAGE INPUT
MEMO
FONT
A A-Z
RTN
TEXT
Active Mat
6. Touch on [ FONT ] to select the type of
text.
Each touch of
switches the type of
text. For details, see page 43.
7. Touch on [ TEXT ] to determine the
character to enter.
8. Repeat steps 5 to 7 to enter the message.
9. Touch [ MEMO ].
You will hear a long beep, and the message
is stored in memory.
10. Press the [ ADJ ] button to return to the
original mode.
Setting the auto-dimmer
(DIMMER IN)
This function allows you to dim the lighting of
the display matched to the illumination or the
brightness inside your car.
Select either “ AUTO ” (interlocked to the
brightness inside your car) or “ ILLUMI ”
(interlocked to the illumination inside your car)
as the auto-dimmer setting.
• When the auto-dimmer function is set to
“ AUTO ”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
• Set the dimmer setting at DMR LEVEL.
• The factory default setting is “
AUTO ”.
1. Press the [ ADJ ] button to set to the adjust
mode.
2. Touch [ APPEARANCE ].
3. Touch on the left of the display to
select “ DIMMER IN ”.
ADJ APPEARANCE
RTN
D I MMER I N A U T O
4. Touch on the right of the display to
select “ AUTO ” or “ ILLUMI ”.
5. Press the [ ADJ ] button to return to the
original mode.
+DXZ958RMC_01-32-Eng.p65 05.1.20, 19:52 46