Clarion DXZ785USB Скачать руководство пользователя страница 45

Страница: 45 / 47

English

DXZ785USB

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.

Error Display

Cause

Measure

/MP3/WM

ERROR 2

A CD is caught inside the CD
deck and is not ejected.

This is a failure of CD deck’s mechanism and consult
your store of purchase.

ERROR 3

A CD cannot be played due
to scratches, etc.

Replace with a non-scratched, non-warped-disc.

ERROR 6

A CD is loaded upside-down
inside the CD deck and does
not play.

Eject the disc then reload it properly.

ger

ERROR 2

A CD inside the CD changer
is not loaded.

This is a failure of CD changer’s mechanism and
consult your store of purchase.

ERROR 3

A CD inside the CD changer
cannot be played due to
scratches, etc.

Replace with a non-scratched, non-warped disc.

ERROR 6

A CD inside the CD changer
cannot be played because it
is loaded upside-down.

Eject the disc then reload it properly.

DVD c

ger

ERROR 2

A DISC inside the DVD
changer cannot be played.

This is a failure of DVD mechanism and consult your
store of purchase.

ERROR 3

A DISC cannot be played due
to scratches, etc.

Retry or replace with a non-scratched, non-warped-
disc.

ERROR 6

A DISC inside the DVD
changer cannot be played
because it is loaded upside-
down.

Eject the disc then reload it properly.

ERROR P

Parental level error

Set the correct Parental level.

ERROR R

Region code error

Eject the disc and replace correct region code disc.

B/MTP/iPod

ERROR 2

The files are not proper MP3/
WMA/AAC format.

Use only properly encoded MP3/WMA/AAC files.

ERROR 3
(USB/MTP mode)

The MP3/WMA/AAC files are
improperly encoded.

Use only properly encoded MP3/WMA/AAC files.

ERROR 3
(iPod mode)

The iPod contains no audio
files.

Insert an iPod containing audio files.

ERROR 5

The connected devices are
not recognized.

Disconnect the devices and reconnect.

BUS-PWR

Overcurrent detection.

Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.

HUB

The connected devices are
not recognized.

Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.

Содержание DXZ785USB















































Результаты поиска

Содержание DXZ785USB

Отзывы:

Похожие инструкции для DXZ785USB

Бренды по названию

Популярные бренды

Clarion DXZ785USB, Руководство пользователя

Результаты поиска

Содержание DXZ785USB

Отзывы:

Похожие инструкции для DXZ785USB

Бренды по названию

Популярные бренды